Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 6.99.33 (ULTRA-PCI) #0: Mon Mar  3 00:52:13 GMT 2014
	root@orion.coris.org.uk:/usr/obj/sparc64/usr/src/sys/arch/sparc64/compile/ULTRA-PCI
total memory = 8192 MB
avail memory = 8025 MB
timecounter: Timecounters tick every 10.000 msec
mainbus0 (root): SUNW,Sun-Blade-1000 (SUNW,Sun-Blade-2000): hostid 8300dcb6
cpu0 at mainbus0: SUNW,UltraSPARC-III+ @ 1200 MHz, UPA id 0
cpu0: system tick frequency 5 MHz
cpu0: 32K instruction (32 b/l), 64K data (32 b/l), 8192K external (512 b/l)
cpu1 at mainbus0: SUNW,UltraSPARC-III+ @ 1200 MHz, UPA id 1
cpu1: system tick frequency 5 MHz
cpu1: 32K instruction (32 b/l), 64K data (32 b/l), 8192K external (512 b/l)
memory-controller at mainbus0 not configured
memory-controller at mainbus0 not configured
schizo0 at mainbus0: addr 40004700000: "Schizo", version 0, ign 200, bus B 0 to 0
schizo0:  pci0 at schizo0
pci0: i/o space, memory space enabled
ebus0 at pci0 dev 5 function 0
ebus0: Sun Microsystems PCIO Ebus2 (US III), revision 0x01
flashprom at ebus0 addr 0-1fffff not configured
pcfiic0 at ebus0 addr 2e-2f, 2d-2d ipl 23: iic mux present
iic0 at pcfiic0: I2C bus
seeprom0 at iic0 addr 0x50: nvram: size 8192
seeprom1 at iic0 addr 0xd0: dimm-fru: size 8192
seeprom2 at iic0 addr 0xd1: dimm-fru: size 8192
seeprom3 at iic0 addr 0xd2: dimm-fru: size 8192
seeprom4 at iic0 addr 0xd3: dimm-fru: size 8192
seeprom5 at iic0 addr 0xd4: dimm-fru: size 8192
seeprom6 at iic0 addr 0xd5: dimm-fru: size 8192
seeprom7 at iic0 addr 0xd6: dimm-fru: size 8192
seeprom8 at iic0 addr 0xd7: dimm-fru: size 8192
bbc at ebus0 addr 0-fffff not configured
ppm at ebus0 addr e-28, 728000-728003, 30002e-30002f, 300600-300607 not configured
pcfiic1 at ebus0 addr 30-31 ipl 23
iic1 at pcfiic1: I2C bus
seeprom9 at iic1 addr 0x50: cpu-fru: size 8192
admtemp0 at iic1 addr 0x18: ADM1021 or compatible environmental sensor
seeprom10 at iic1 addr 0x51: cpu-fru: size 8192
admtemp1 at iic1 addr 0x4c: ADM1021 or compatible environmental sensor
tda0 at iic1 addr 0x24: fan-control
card-reader at iic1 addr 0x20 not configured
seeprom11 at iic1 addr 0x54: motherboard-fru: size 8192
i2c-bridge at iic1 addr 0x30 not configured
beep at ebus0 addr 32-37 not configured
audiocs0 at ebus0 addr 200000-2000ff, 702000-70200f, 704000-70400f, 722000-722003 ipl 20 ipl 21: CS4231A
audio0 at audiocs0: full duplex, playback, capture
rtc0 at ebus0 addr 300070-300071 ipl 24: mc146818 compatible time-of-day clock: ds1287
gpio at ebus0 addr 300600-300607 not configured
pmc at ebus0 addr 300700-300701 not configured
floppy at ebus0 addr 3023f0-3023f7, 706000-70600f, 720000-720003 ipl 25 not configured
parallel at ebus0 addr 300278-300287, 30002e-30002f, 700000-70000f ipl 1c not configured
sab0 at ebus0 addr 400000-40007f ipl 22: rev 3.2
sabtty0 at sab0 port 0
sabtty1 at sab0 port 1
gem0 at pci0 dev 5 function 1: Sun Microsystems ERI Ethernet (rev. 0x01)
gem0: interrupting at ivec 321d
ukphy0 at gem0 phy 1: OUI 0x0006b8, model 0x000c, rev. 1
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
gem0: Ethernet address 00:03:ba:00:dc:b6, 2KB RX fifo, 2KB TX fifo
fwohci0 at pci0 dev 5 function 2: Sun Microsystems FireWire Controller (rev. 0x01)
fwohci0: interrupting at ivec 21e
fwohci0: OHCI version 1.0 (ROM=0)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 00:03:ba:ff:fe:00:dc:b6
fwohci0: Phy 1394a available S400, 4 ports.
fwohci0: Link S400, max_rec 2048 bytes.
ieee1394if0 at fwohci0: IEEE1394 bus
fwip0 at ieee1394if0: IP over IEEE1394
fwohci0: Initiate bus reset
ohci0 at pci0 dev 5 function 3: Sun Microsystems USB Controller (rev. 0x01)
ohci0: interrupting at ivec 21f
ohci0: OHCI version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
esiop0 at pci0 dev 6 function 0: Symbios Logic 53c875 (ultra-wide scsi)
esiop0: using on-board RAM
esiop0: interrupting at ivec 1a18
scsibus0 at esiop0: 16 targets, 8 luns per target
esiop1 at pci0 dev 6 function 1: Symbios Logic 53c875 (ultra-wide scsi)
esiop1: using on-board RAM
esiop1: interrupting at ivec 1a19
scsibus1 at esiop1: 16 targets, 8 luns per target
radeonfb0 at pci0 dev 1 function 0: ATI Technologies Radeon 7000/VE QY (rev. 0x00)
radeonfb0: Video BIOS not present
radeonfb0: No video BIOS, using default clocks
radeonfb0: refclk = 27.000 MHz, refdiv = 12 minpll = 125000, maxpll = 400000
no data for est. mode 640x480x67
no data for est. mode 640x480x67
radeonfb0: 64 MB aperture at 0x08000000, 64 KB registers at 0x00130000
radeonfb0: display 0: initial virtual resolution 1920x1200 at 8 bpp
radeonfb0: using 32 MB per display
radeonfb0: port 0: physical 1920x1200 60Hz
radeonfb0: port 1: physical 1920x1200 60Hz
wsdisplay1 at radeonfb0 kbdmux 1
wsmux1: connecting to wsdisplay1
wsdisplay1: screen 0-3 added (fb, vt100 emulation)
drm at radeonfb0 not configured
ohci1 at pci0 dev 2 function 0: Acer Labs M5237 USB 1.1 Host Controller (rev. 0x03)
ohci1: interrupting at ivec 211
ohci1: OHCI version 1.0, legacy support
usb1 at ohci1: USB revision 1.0
ohci2 at pci0 dev 2 function 1: Acer Labs M5237 USB 1.1 Host Controller (rev. 0x03)
ohci2: interrupting at ivec 211
ohci2: OHCI version 1.0, legacy support
usb2 at ohci2: USB revision 1.0
ehci0 at pci0 dev 2 function 3: Acer Labs M5239 USB 2.0 Host Controller (rev. 0x01)
ehci0: interrupting at ivec 210
ehci0: EHCI version 1.0
ehci0: companion controllers, 2 ports each: ohci1 ohci2
usb3 at ehci0: USB revision 2.0
fwohci1 at pci0 dev 2 function 4: Acer Labs product 0x5253 (rev. 0x00)
fwohci1: interrupting at ivec 212
fwohci1: OHCI version 1.10 (ROM=1)
fwohci1: No. of Isochronous channels is 4.
fwohci1: EUI64 00:30:bd:05:18:00:06:41
fwohci1: Phy 1394a available S400, 3 ports.
fwohci1: Link S400, max_rec 2048 bytes.
ieee1394if1 at fwohci1: IEEE1394 bus
fwip1 at ieee1394if1: IP over IEEE1394
fwohci1: Initiate bus reset
mpt0 at pci0 dev 3 function 0: Symbios Logic 53c1020/53c1030 (rev. 0x08)
mpt0: interrupting at ivec 1a14
scsibus2 at mpt0: 16 targets, 8 luns per target
mpt1 at pci0 dev 3 function 1: Symbios Logic 53c1020/53c1030 (rev. 0x08)
mpt1: interrupting at ivec 1a15
scsibus3 at mpt1: 16 targets, 8 luns per target
schizo1 at mainbus0: addr 40004600000: "Schizo", version 0, ign 200, bus A 0 to 3
schizo1:  pci1 at schizo1
pci1: i/o space, memory space enabled
isp0 at pci1 dev 4 function 0: QLogic FC-AL and Fabric HBA
isp0: interrupting at ivec 204
isp0: invalid NVRAM header
isp0: invalid NVRAM header
isp0: bad frame length (0) from NVRAM- using 1024
isp0: bad execution throttle of 0- using 16
ppb0 at pci1 dev 1 function 0: Intel S21152BA,S21154AE/BE PCI-PCI Bridge (rev. 0x00)
pci2 at ppb0 bus 1
pci2: i/o space, memory space enabled
ppb1 at pci2 dev 0 function 0: Intel S21152BA,S21154AE/BE PCI-PCI Bridge (rev. 0x00)
pci3 at ppb1 bus 2
pci3: i/o space, memory space enabled
cas0 at pci3 dev 0 function 0: National Semiconductor Saturn (rev. 0x30)
cas0: interrupting at ivec 3200
cas0: Ethernet address 00:03:ba:b1:40:b8
gphyter0 at cas0 phy 1: DP83865 1000BASE-T media interface, rev. 8
gphyter0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
gphyter0: strapped to slave mode
cas1 at pci3 dev 1 function 0: National Semiconductor Saturn (rev. 0x30)
cas1: interrupting at ivec 3201
cas1: Ethernet address 00:03:ba:b1:40:b9
gphyter1 at cas1 phy 1: DP83865 1000BASE-T media interface, rev. 8
gphyter1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
gphyter1: strapped to slave mode
ppb2 at pci2 dev 4 function 0: Intel S21152BA,S21154AE/BE PCI-PCI Bridge (rev. 0x00)
pci4 at ppb2 bus 3
pci4: i/o space, memory space enabled
cas2 at pci4 dev 2 function 0: National Semiconductor Saturn (rev. 0x30)
cas2: interrupting at ivec 3202
cas2: Ethernet address 00:03:ba:b1:40:ba
gphyter2 at cas2 phy 1: DP83865 1000BASE-T media interface, rev. 8
gphyter2: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
gphyter2: strapped to slave mode
cas3 at pci4 dev 3 function 0: National Semiconductor Saturn (rev. 0x30)
cas3: interrupting at ivec 3203
cas3: Ethernet address 00:03:ba:b1:40:bb
gphyter3 at cas3 phy 1: DP83865 1000BASE-T media interface, rev. 8
gphyter3: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
gphyter3: strapped to slave mode
upa0 at mainbus0
ffb0 at upa0: Creator3D, model SUNW,501-4788, dac 10
no data for est. mode 640x480x67
ffb0: video mode set to 1920 x 1200 @ 60Hz
ffb0: attached to /dev/fb0
wsdisplay0 at ffb0 kbdmux 1: console (sunffb, vt100 emulation)
wsmux1: connecting to wsdisplay0
wsdisplay0: screen 1-3 added (sunffb, vt100 emulation)
ppm at mainbus0 not configured
pcons at mainbus0 not configured
fwohci0: BUS reset
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
ieee1394if0: 1 nodes, maxhop <= 0 cable IRM irm(0) (me)
ieee1394if0: bus manager 0
fwohci1: BUS reset
fwohci1: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
ieee1394if1: 1 nodes, maxhop <= 0 cable IRM irm(0) (me)
ieee1394if1: bus manager 0
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
timecounter: Timecounter "tick-counter" frequency 1200000000 Hz quality 100
timecounter: Timecounter "stick-counter" frequency 5000000 Hz quality 200
No counter-timer -- using %stick at 5MHz as system clock.
scsibus0: waiting 2 seconds for devices to settle...
scsibus1: waiting 2 seconds for devices to settle...
scsibus2: waiting 2 seconds for devices to settle...
scsibus3: waiting 2 seconds for devices to settle...
scsibus4 at isp0: 256 targets, 8 luns per target
uhub0 at usb0: Sun Microsystems OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 4 ports with 4 removable, self powered
uhub1 at usb2: Acer Labs OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
scsibus4: waiting 2 seconds for devices to settle...
uhub2 at usb3: Acer Labs EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub2: 6 ports with 6 removable, self powered
uhub3 at usb1: Acer Labs OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
IPsec: Initialized Security Association Processing.
uhidev0 at uhub0 port 3 configuration 1 interface 0
uhidev0: vendor 0x0430 product 0x0100, rev 1.10/1.05, addr 2, iclass 3/1
ums0 at uhidev0: 3 buttons
wsmouse0 at ums0 mux 0
cd0 at scsibus0 target 6 lun 0: <TOSHIBA, DVD-ROM SD-M1401, 1009> cdrom removable
cd0: sync (50.00ns offset 16), 8-bit (20.000MB/s) transfers
uhidev1 at uhub0 port 4 configuration 1 interface 0
uhidev1: vendor 0x0430 product 0x0005, rev 1.00/1.01, addr 3, iclass 3/1
ukbd0 at uhidev1: 8 modifier keys, 6 key codes
wskbd1 at ukbd0: console keyboard, using wsdisplay0
ss0 at scsibus1 target 4 lun 0: <HP, C1130A, 3614> processor fixed
ss0: HP ScanJet 4p
ss0: async, 8-bit transfers
sd0 at scsibus4 target 0 lun 0: <FUJITSU, MAW3300FC, 2610> disk fixed
sd0: 279 GB, 78753 cyl, 8 head, 930 sec, 512 bytes/sect x 585937500 sectors
sd1 at scsibus4 target 1 lun 0: <FUJITSU, MAW3300FC, 2606> disk fixed
sd1: 279 GB, 78753 cyl, 8 head, 930 sec, 512 bytes/sect x 585937500 sectors
Kernelized RAIDframe activated
raid0: RAID Level 1
raid0: Components: /dev/sd0a /dev/sd1a
raid0: Total Sectors: 585937408 (286102 MB)
root on raid0a dumps on raid0b
root file system type: ffs
WARNING: clock gained 5 days
raid0: Device already configured!
wsdisplay0: screen 4 added (sunffb, vt100 emulation)
    

-^- Back to my Sun OpenPROM/OpenFirmware device trees page -^-